How to do a good job in the maintenance of high-pressure washers

The clean design of the high-pressure washer makes it safe to perform heavy cleaning tasks with high intensity and sustainably in the automotive industry, construction sites, agriculture, municipal engineering and industrial enterprises. The service life is longer, and it can be used continuously without stopping shifts and with high intensity.

High-pressure washer maintenance:

1. Regularly check the working status of each part of the high-pressure cleaner, whether the screws are loose and intact, and ensure that the parts in use are in good condition.

2. Regularly inspect various valves, joints and high-pressure water guns and other parts of the high-pressure cleaner.

3. Due to the work in a high-pressure environment, the high-pressure nozzle is inevitably worn, so it must also be replaced in time. Appropriately lowering the pressure can extend the service life of the nozzle and high-pressure line.

4. Check the power equipment every day to ensure the normal supply of fuel, oil, medium and cooling water.

5. Check the pump before water supply to ensure a certain water pressure and flow of water supply, there is no rust in the water tank, the filter needs to be checked regularly to ensure that there is no blockage and damage, and the solid particles and water pipes should be prevented from entering the pump and nozzle filter screen should be adapted to the requirements of water quality.

6. Before using the high-pressure cleaner for cleaning operations, it is necessary to check whether there is steel wire fracture or wear on the outside of the high-pressure pipe. 7. After the cleaning operation, rinse the hose and filter connected to the detergent to remove any residue of detergent to prevent corrosion.

HOT NEWS