Precautions when installing canvas ventilated soft connections

The canvas ventilated soft connection is made of wear-resistant reinforced canvas cold-drawn steel wire, diameter: 100mm or more of any size, temperature resistance -30 degrees - 150 degrees (the material can be strengthened according to customer requirements to achieve a higher temperature) Working pressure: 450mmWG/ (the material can be strengthened according to customer requirements to achieve higher working pressure) has good corrosion resistance, can be used outdoors, and has a long service life, energy saving and environmental protection, easy installation!

Precautions when installing canvas ventilated soft connections:

1. The soft connection needs to keep the casing vertical;

2. The radial gap of the rotor through the shaft seal of the casing is uniform;

3. There is no gap between the shaft seal aggregate and the shaft touch;

4. The anchor nut of the soft connection casing is fastened according to the required momentum and moment value;

5. It is necessary to reserve the tuyere soft connection chassis.

6. There should be a remaining shrinkage gap in the casing for the soft connection shrinkage nut hole.

7. If the joint surface is sealed with asbestos rope, the inside and outside of the nut should be painted, especially the inner side should ensure that it is not moved by the positive and negative pressure of the soft connection of the tuyere.

HOT NEWS