Burning Mannequin Model uses 1:1 adult male model, material is FRP with more stable, inert fire-resistant and high-strength Performance. and 2~3mm thick, 1.72m2 area. There are a number of sensors in the head, torso, legs and arm surface of the mannequin model evenly.
Product Details The burning dummy system is used to test the overall performance of heat insulation protective clothing. Complete combustion dummy system which consists of combustion chamber, combustion dummy and gas control system and other components. Standard: EN ISO 11612, EN ISO 11611, ISO 13506, EN469:2005. Principle:
Main configuration of shooting dummy system: 1、The dummy has shoulder joints, elbow joints, hip joints, knee joints and sption jointsThe wire connection and the mannequin support frame can be installed on the top of the doll's head, side and neck, or other positions required by customers.
The moisture permeation load through building materials can be calculated using (7.22), where p = permeance factor, g/(h m 2 kPa), A = area, m2; ΔVP = vapor pressure difference across the material, kPa. Evaporation from wet surfaces and open tanks
Burning Mannequin Model uses a scaled adult male model 1:1, material is FRP withc stable, flame retardant and high strength performance and thickness of 2~3mm, area of 1.72m2. There are a number of sensors in the head, torso, legs and arm surface of the mannequin model evenly.
The dummy ignition system consists of a dummy combustion computer, a sensor cluster heat generator, flame generator, co-computer control module, data acquisition and processing module and combustion analysis module, mainly controlled by the computer as the core.
Burning dummy model adopts 1:1 adult male model, the material is FRP with stability, flame inert and high strength performance and 2~3mm thickness, 1.72m2 area. There are a number of sensors in the head, torso, legs and arms surface of mannequin model evenly.
The purge dummy system is used to test the overall thermal performance of protective clothing. Welcome-Qinsun Instruments .Website! If you have any questions, please call +86- ！
The Burning man system is WIt is used to test the overall thermal insulation performance of protective clothing. Complete combustion dummy system, which consists of combustion chamber, burning dummy and gas control system and other components. Standard: EN ISO 11612, EN ISO 11611, ISO 13506, EN469:2005. Principle:
This doll fully simulates the human body, including details such as dollsigts and faces. Nearly 700m of pure nickel wire is laid in the dummy from the finger to the nasal cavity, and the independent intelligent circuit ensures the accuracy of the male thermal dummy
The Burnie Flame Test doll shell is made from a unique ceramic composite material that is completely flame retardant and will not deteriorate with use. A modular combustor can also be provided, having refractory construction, PLC controlled gas supply and burner array, ventilation and fire protection systems.
The flaming male model uses 1:1 adult male model, the material is FRP with stable, flame retardant and high strength performance and 2~3mm thickness, 1.72m2 area. There are a number of sensorss in the head, torso, legs and arm surface of the mannequin model evenly.
The purge dummy system is used to test the overall thermal performance of protective clothing. Welcome-Qinsun Instruments .Website! If you have any questions, please call +86- ！
Product Details The burning dummy system will be used to test the overall thermal insulation performance of protective clothing. Complete combustion dummy system consisting of combustion chamber, burning doll and gas control system and other components. Standard: EN ISO 11612, EN ISO 11611, ISO 13506, EN469:2005. Principle:
The Burning Manikin System is used pTo test the overall thermal performance of protective clothing and gas control system and other components Standard: EN ISO 11612, EN ISO 11611, ISO 13506, EN469:2005 Principle:
Temperature System: 1. Range: 0-55℃ 2. #Accuracy: ±0.1℃ 3. System Default: 37℃ 4. Difference maximum temperature between zones: 3℃ 5. Standard temperature measurement range: 22 independently controllable heat energy zones 6. Heating method: Heating plate type (uniform and stable) or extremely stable heating wire 7.
Training opportunities. It can be difficult to practice putting out the flame of a burning victim. Most training manikins cannot be exposed to an open flame, and placing a real human being near an open flame is dangerous and impractical. Our firefighter doll ismade for this challenge.
Burning dummy model adopts 1:1 adult male model, the material is FRP with stable performance, flame inert and high strength and thickness 2~3mm, area 1.72m2. There are a number of sensors in the head, torso, legs and arm surface of the mannequin model evenly.
Firing Dummy System is used to test performance overall thermal protective clothing. Complete combustion dummy system consisting of combustion chamber, combustion dummy and gas control system and other components. Standard: EN ISO 11612, EN ISO11611, ISO 13506, EN469:2005. Principle:
The burning dummy system is used to test the overall thermal protection performance of protective clothing. Welcome-Qinsun Instruments .Website! If you have any questions, please call +86- ！
Used for tests uses all the thermal protection performance of protective clothing. The complete dummy system consists of a combustion chamber, dummy and air supply control. Standard test: EN ISO 11612, EN ISO 11611, ISO 13506, EN469:2005 etc. apply to this test system. Sensor layout:
Training opportunities. Training to extinguish the flame of a burning victim can be difficult. Most dummies are not capable of being exposed to incandescent flame and it is dangerous.x, real and impractical to bring a real human anywhere near a glowing flame. Our firefighter doll is made for this challenge.
Building envelopes that allow the free flow of Vapor molecules are known in building biology as breathable walls. Other more appropriate names for this type of building envelope are vapor permeable wall, vapor permeable wall or through wall system. The incorporation of waterproof plastic layers into the construction
Burning Mannequin Model uses 1 :1 adult male model, the material is FRP with stable, flame retardant, high strength performance and 2~3mm thickness, 1.72m2 area. There are a number of sensors inthe head, torso, legs and arm surface of the mannequin model evenly.
Firing dummy system is used to test the overall thermal performance of protective clothing . Complete combustion doll system, which consists of combustion chamber, burning doll and gas control system and other components. Standard: EN ISO 11612, EN ISO 11611, ISO 13506, EN469:2005. Principle:
Used to test the overall temperature insulation performance of protective clothing . The complete dummy system consists of a combustion chamber, dummy and air supply control. Standard test: EN ISO 11612, EN ISO 11611, ISO 13506, EN469:2005 etc. apply to this test system. Sensor layout:
The burning dummy system is used to test the overall thermal protection performance of protective clothing dummy and gas control system and other components . Standard: EN ISO 11612, EN ISO 11611, ISO 13506, EN469:2005. Principle:
Building envelopes that allow the free flow of vapor molecules are known in building biology than known breathable walls. Other more appropriate names for this type of building envelope are vapor permeable wall, vapor permeable wall or through wall system. The incorporation of waterproof plastic layers into structures
With the firefighter dummy, you can practice reacting quickly to victims in action.u. Demonstration tool Ideal for teaching and/or student participation. Can be practiced standing or lying down. Fire resistant Practice rolling exercises, use fire blankets, or safely use portable fire extinguishers if you have help burning the person.
You can also send a message to us by this email info@qinsun-lab.com, we will reply tu you within 24 hours.Now tell us your need,there will be more favorable prices!
Home |
Product |
About |
Contact
Email: info@qinsun-lab.com
No.258 Ban Ting road, Song Jiang district, Shanghai
Leave Message
WhatsApp