Walter Sweat Cloth Dummy is fully articulated and can be placed on shoulders, elbows, hips , knees and ankles. Offers different movement postures. It offers comprehensive device monitoring, error detection, data logging and analysis functions. Fit Standard: -Nordic standards (e.g. INSTA 352-355)
Walter Sweat Cloth Dummy are essential tools for assessing the comfort of the thermal environment and clothing, and exploring the dynamics of heat and moisture transfer from the human body to the environment - a foundation of thermal physiology and environmental engineering. Technical advantages of the Walter sweat doll:
The surface of this "KEM" articulated mannequin can be divided into 17 segments. The individually controllable sweat glands of children under 17 are installed in the parmeable water vapor skiIn this "KEM" doll, to produce sweat water on the skin at the rate of 0 to 1500 g/m 2 /h . See Yehu Lu thermal doll types chapter purchase book,
The latest sweating thermal doll uses a motorized body to imitate walking human and achieve the goal of dynamic testing. Features 1. Black surface treatment perfectly simulates human skin with the same radiance. 2. Insulation capability between independent heating section achieves isothermal heating.
Sweaty Rag Doll (Walter). The Sweat Doll (Walter) is the first sweat doll developed by Fan and his colleagues 4, 6. Figure 4 shows the training dummy...
This article features the latest developments of Walter the Sweat Rag Doll. These include improved simulation of "walking motion", design and construction of an automated water supply as well as real-time measurement of water loss through evaporation and regulation of the "skin" temperature by
The sweat manikin (Walter) is the first sweat manikin developed by Fan and his colleagues 4, 6. Figure 4 shows the dummy wearing a t-shirt during the test. The experiment was
With the use original of breathable fabric to simulate the skin and water circulation system to simulate the skin, blood circulation has been achieved the new type of training dummy causes the whole body sweating and accuracy of very high measurement (less than 5% CV) at a fraction of the cost of other manikins developed to date.
The new sweat dummy achieves full-body sweating and very high measuring accuracy ( namely a CV of less than 5%), but at a fraction of the cost of other previously developed sweat manikins.
TY - DAY. T1 - Welding simulation with the Walter welding dummy. AU - Fan, Jintu. AP - 1/1/2006. Y1 - 2006/1/1. N2 thermal dummies are essential tools for assessing environmental comfort.thermal ent and clothing, and to explore the dynamics of heat and moisture transfer from the human body to the environment - a basis of thermal and environmental physiology
Polytechnic University. The new sweat manikin achieved full body sweating and very high measurement accuracy (i.e. CV less than 5%), but at a price of only a small fraction of other sweat manikins developed nowadays. Keywords: perspiration, perspiration, doll, thermal comfort, clothing, environmental ergonomics. 1 Presentation
The sweat manikin (Walter) is the first sweat manikin developed by Fan and his colleagues 4, 6. Figure 4 shows the dummy wearing a t-shirt during the test. The experienceit was
With the original use of breathable fabric to simulate skin and a circulation system of water to simulate skin, blood circulation enabled the new training manikin to achieve full body perspiration and very high measurement accuracy (i.e. CV less than 5%), but at a fraction the cost of other mannequins developed to date.
The development of hot body dummy has attracted much international attention in some developed countries , and China has been since the 1980s entered this high-tech field years ago. Pros recently launched by Professor ZhangThe thesis is China's second generation of hot body prostheses, listed as a key discipline projectnational 863 and Shanghai.
The perspiration of the human body can be divided into hidden and visible perspiration. When the temperature is low, that is, below 20 ° C, people are in a static state, through breathing, skin pore diffusion, every hour of the body sweat, heat up, feel this sweating when people don't take care of it, so- called senseless sweating, called recessive sweating.
TY - DAY. T1 - Welding simulation with the Walter welding dummy. AU - Fan, Jintu. AP - 1/1/2006. Y1 - 2006/1/1. N2 - thermal manikins are essential tools for assessing the comfort of the thermal environment and clothing, and for exploring the dynamics of heat and moisture transfer from the human body to the surrounding environment.irony - a foundation of thermal and environmental physiology
Polytechnic University. The new sweat manikin achieves full body perspiration and very high measurement accuracy (i.e. CV less than 5%), but at a fraction of the cost of other sweat manikins developed to date. Keywords: perspiration, perspiration, doll, thermal comfort, clothing, environmental ergonomics. 1 Introduction
Sweaty Rag Doll (Walter). The sweat doll (Walter) is the first sweat doll developed by Fan and his colleagues 4, 6. Figure 4 shows the doll...
This article is about the latest developments in Walter the Ragdoll sweaty,reported. These include improved simulation of "walking motion", design and construction of an automated water supply, real-time measurement of water loss through evaporation and regulation of the temperature of the "skin" by
The development of a thermal dummy has attracted many international attention in some developed countries, and China has entered this high-tech field since the 1980s. Professor Zhang's recently launched prosthesis is the second generation of hot body prostheses in China, listed as the national key discipline project 863 and Shanghai.
The perspiration of the human body can be divided into hidden and visible perspiration. When the temperature is low, c 'is-that is, lower than 20°C, people are in a static state, through breathing, skin pore diffusion, every hour of body sweat, heat, of this sweating people don't feel not, what is called senseless sweating, what is called recessive sweating.
With the original use of breathable fabric to simulate the circulation system of the skin and water to simulate blood circulation, the new training dummy has achieved full body sweat and very high measurement accuracy (i.e. CV less than 5%), but at a fraction of the cost of other welding dummies developed to date.
TY - DAY. T1 - Welding simulation with the Walter welding dummy. AU - Fan, Jintu. AP - 1/1/2006. Y1 - 2006/1/1. N2 thermal manikins are essential tools for assessing the comfort of the thermal environment and clothing, and for exploring the dynamics of heat and moisture transfer from the human body to the environment - a basis of thermal physiology and the environment
Sweaty Rag Doll (Walter). The sweat doll (Walter) is the first sweat doll developed by Fan and his colleagues 4, 6. Figure 4 shows the dummy...
With the original use of a breathable fabric for protect the skin and a whatThe new training manikin achieves full-body sweating and very high measurement accuracy (i.e. CV less than 5%), but at a fraction of the cost of other previously developed sweat manikins.t.
The development of a hot body training dummy has attracted a lot of attention international in some developed countries, and China has participated in the high-tech field since the 1980s. The prosthesis recently launched by Professor Zhang is China's second generation of hot body prostheses, listed as the national key discipline project 863 and Shanghai.
The perspiration of the human body can be divided into hidden and visible perspiration. If the temperaturetemperature is low, that is, lower than 20°C, people are in a static state, through breathing, skin pore diffusion, every hour of the body sweat, the heat, this sweating people don't feel, what we apshovel senseless sweating, called recessive sweating.
TY - DAY. T1 - Welding simulation with the Walter welding dummy. AU - Fan, Jintu. AP - 1/1/2006. Y1 - 2006/1/1. N2 thermal manikins are essential tools for assessing the comfort of the thermal environment and clothing, and for exploring the dynamics of heat and moisture transport from the human body to the environment - a basis for thermophysiology and the environment
Polytechnic University. The new sweat manikin achieves full body perspiration and very high measurement accuracy (i.e. less than 5% CV), yet at a fraction of the cost of other previously developed sweat manikins. Keywords: perspiration, perspiration, doll, thermal comfort,clothing, environmental ergonomics. 1 Presentation
You can also send a message to us by this email info@qinsun-lab.com, we will reply tu you within 24 hours.Now tell us your need,there will be more favorable prices!
Home |
Product |
About |
Contact
Email: info@qinsun-lab.com
No.258 Ban Ting road, Song Jiang district, Shanghai
Leave Message
WhatsApp