"Walter" is the first thermal dummy mainly made of water and high-strength breathable fabric. Sweating is simulated by a waterproof yet moisture-permeable fabric "skin" that retains water but allows moisture to transfer from inside the doll through the millions of tiny pores in the skin.
The Walter Sweat Cloth Mannequin is fully articulated and can be placed on the shoulders, elbows, hips, knees and ankles for various movement postures. It offers comprehensive device monitoring, error detection, data logging and analysis functions. Fitting standard: - Nordic standards (e.g. INSTA 352-355)
The new sweat manikin achieves full-body sweat and very high measurement accuracy (i.e. CV less than 5%) at a fraction of the cost of other sweat manikins previously developed.
With the original use of breathable fabric to simulate the skin and circulation system of water to simulate blood circulation, the new full body perspiration training manikin and very high measurement accuracy (i.e. less than 5% CV), but at a fraction of the cost of other developed sweat manikins nowadays.
The improved Walter Sweating Fabric Mannequin was used to show the impact of walking motion on insulation and heat resistance. clothing evaporation, including improved "walking simulationmovement", design and construction of automatic water supply, and real-time measurement by adjusting the pump in the human body, evaporate the water loss, and regulate the temperature of the "skin".
New features and applications of Walter the Sweaty ClothThis article reports on the latest developments of Walter the Sweaty Cloth Man. This includes improved simulation of "movement walking", the design and construction of an automated water supply and the real-time measurement of water loss by evaporation and the regulation of the temperature of the "skin" by
With the original use of breathable fabric to simulate the circulation system of skin and water e .gBy simulating blood circulation, the new dummy achieved full body sweating and very high measurement accuracy (c.
This item reports on Walter's latest developments, a sweaty cloth man, including improved simulation of the "walking motion", design and construction of an automated water supply, and measurement real-time analysis of evaporative water loss and "skin" temperature regulation by
Sweat Rag Doll (Walter) The Sweat Doll (Walter) is the first sweat doll developed by Fan and hiscolleagues 4, 6. Figure 4 shows the...
Dummy Sweat Tests. TPACC's "Newton" advanced sweat manikin systems are used to evaluate entire garment systems (or components of garment systems) for thermal and moisture management related to garment insulation and breathability . By measuring these values on a human form, clothes can be evaluated as they would be worn (Walter Sweating Fabric Mannequin) is a new generation of smart sweating fabric mannequins developed by Qinsun and famous professors from the Polytechnic University of Hong Kong. This is a simulation of sweating while sweating. The dummy can test detailed data systems. The dummy itself has no fingers or faces.
The Price Advantage of the Walter Breathable Cloth Dummy: Since the development of the first non-breathable copper thermal dummy with a segment of In the United States -Poore in the 1940s, it There have been many developments in thermal doll technology around the world. Nevertheless, simulating perspiration continues to be one of the biggest challenges.
The Walter Sweat Cloth Mannequin is fully articulated and can be placed on the shoulders, elbows, hips, knees and ankles for various movement postures. It offers comprehensive device monitoring, error detection, data logging and analysis functions. Customization standard: - Nordic standards (eg INSTA 352-355)
"Walter" is the first thermal mannequin doll, which is mainly made of water and high-strength breathable fabric. Sweating is simulated by a waterproof yet moisture-permeable fabric "skin" that retains water but allows moisture to transfer from inside the doll through the millions of tiny pores in the skin. Walter simulates human thermal physiology.
In this article, the latest developments of Walter, a sweaty rag doll, are reported. These include enhanced "walking motion" simulation, automated water supply design and construction, and real-time evaporative water loss measurement and regulation. of "skin" temperature by
Ol Sweat Cloth (Walter). The sweat doll (Walter) is the first sweat doll developed by Fan and his colleagues 4, 6. Figure 4 shows the...
Advanced sweat manikin systems from TPACC's "Newton" type are used to evaluate entire garment systems (or garment system components) for heat and moisture management in relation to garment insulation and breathability. By measuring these values on a human form, clothing can be assessed as it would be worn in the field.
The new sweat doll achieves sweating all over the body and a very high measurement accuracy (i.e. say less than 5% CV) at only a low cost fraction of other sweat manikins developed so far.t.
The Walter Sweat Cloth Mannequin is fully articulated and can be placed on the shoulders, elbows, hips, knees and ankles for various movement postures. It offers comprehensive device monitoring, error detection, data logging and analysis functions. Customization standard: - Nordic standards (e.g. INSTA 352-355)
" Walter" is the first thermal mannequin doll mainly made of water and high-strength breathable fabric. Sweating is simulated by a "skin" of waterproof yet moisture-permeable fabric that retains water but allows the transfer of moisture inside the doll through the millions of tiny pores in the skin. Walter simulates hum thermal physiologyelder.
Walter Thermal Sweat Dummy Test Equipment is for testing insulation properties thermal functional fabrics, clothing, research and development and production, sleeping bags and other materials. It can also be used to analyze the environmental impact on human comfort and the environmental conditions that affect the comfort of the human body.
Walter sweat manikin Doha Product Features: The thermal dummy system (warm body sweat manikin) uses the general comfort of heat and moisture of clothing for evaluation, and provides accurate and efficient test data for research and analysis of mine thermal protection technologies and identification of thermal accidents inns metallic and non-metallic mines.
TPACC's advanced "Newton" type sweat manikin systems are used to test entire garment systems (or components of garment systems). Assess heat and moisture management versus garment insulation and breathability. By measuring these values on a human form, clothing can be assessed as it would be worn in the field.
Price RangePart of Walter Sweat Cloth Dummy: Since the development of the first sweat-free copper thermal dummy with a segment of the US military in the 1940s, there were many developments in thermal dummies technology around the world. Nevertheless, theWelding simulation remains one of the biggest challenges.
Walter thermal sweat dummy test equipment applies to the thermal insulation properties of functional fabrics, R&D and production of clothing, sleeping bags and other materials. It can also be used to analyze the environmental impact on human comfort and the environmental conditions that correspond to the comfort of the human body.
"Walter" is the first thermal dummy that consists mainly of water and breathable material to high resistance. Sweating is caused by a simulated "skin" of waterproof yet moisture-permeable fabric that traps water but allows moisture to transfer from inside the doll through the millions of tiny pores in the doll's interior.the skin. Walter simulates human thermal physiology.
Through the original use of breathable fabric to simulate the skin and circulation system water in order to simulate blood circulation, the new manikin achieves full body perspiration and very high measurement accuracy (i.e. CV less than 5%), but at a fraction of the cost of other anti- perspiration previously developed.
Walter Sweat Doll Doha Product Features: The thermal dummy system (hot body sweat dummy ) is used to evaluate the heat and moisture comfort of clothing and provides accurate and efficient test data for research and analysis of mine thermal protection technologies and accident identificationheat in metallic and non-metallic mines.
The new welding dummy achieves full-body sweating and very high measurement accuracy (i.e. less than 5% CV), but increases a fraction of the cost of other previously developed sweat manikins. Tagged Clothing Environment Ergonomics Model Perspiration Perspiration Thermal Comfort ASJC Scopus Topics
You can also send a message to us by this email info@qinsun-lab.com, we will reply tu you within 24 hours.Now tell us your need,there will be more favorable prices!
Home |
Product |
About |
Contact
Email: info@qinsun-lab.com
No.258 Ban Ting road, Song Jiang district, Shanghai