Burning Mannequin Model uses 1:1 adult male model, material is FRP with more stable, inert fire-resistant and high-strength Performance. and 2~3mm thick, 1.72m2 area. There are a number of sensors in the head, torso, legs and arm surface of the mannequin model evenly.
The flaming mannequin model adopts 1:1 adult male model, the material is FRP with stable, flame retardant and high performance. strength and 2~3mm thick, 1.72m2 area. There are a number of sensors in the head, torso, legs and arm surface of the mannequin model evenly.
Principle: The engraving dummy system consists of: 1.computer engraving dummy; 2nd group of thermal sensors; 3. Flame generator; 4. Computer control module; 5. Data acquisition and processing module; 6. Fire analysis module. 1.
Burning Mannequin Model uses 1:1 adult male model, material is FRP with more performance stable, fire inert and high strength and 2~3mm thick, 1.72m2 area. There are a number of sensors in the head, torso, legs and arm surface of the mannequin model evenly.
The Burning Manikin System is used to test the overall thermal performance of protective clothing. Complete combustion doll system, which consists of combustion chamber, burning doll and gas control systemand other components. Standard: EN ISO 11612, EN ISO 11611, ISO 13506, EN469:2005. Principle:
Burning Mannequin Model uses 1:1 adult male model, the material is FRP with more stability, flame and high strength performance. and 2~3mm thick, 1.72m2 area. There are a number of sensors in the dummy mola head, torso, legs and del arm surface evenly.
Burning Mannequin Model uses 1:1 adult male model, material is FRP with stable , flame-retardant effect and high resistance and thickness from 2 to 3 mm, surface of 1.72 m2. There are a number of sensors in the head, torso, legs and arm surface of the mannequin model evenly.
The burning dummy system is used to test the overall thermal performance of protective clothing. Complete combustion doll system, which consists of combustion chamber, burning doll and gas control system and other components. Standard: EN ISO 11612, EN ISO 11611, ISO 13506, EN469:2005. Principle:
Burning Dummy System fully meets the relevant technical indicators of ISO13506, ASTMF1930 and other burning dummy systemsRating. The body size of the mannequin conforms to the standard Chinese adult male body shape, and 135 heat flow sensors are installed all over the body, covering various parts such as the torso, head, hands and feet.
Blazing mannequin model adopts adu male modellte 1:1, the material is FRP with stable performance, flame retardant and high strength and 2~3mm thick, area 1.72m2. There are a number of sensors in the head, torso, legs and arm surface of the mannequin model evenly.
Flame Manicure Model uses 1:1 MModel adult male, the material is FRP with stable, flame retardant, high strength performance and thickness 2~3mm, area 1.72m2. There are a number of sensors in the head, torso, legs and arm surface of the mannequin model evenly.
The flaming male model uses a 1:1 adult male model, the material is FRP with fire inert and high strength performancemore stable and a thickness of 2 to 3 mm, an area of 1.72 m2 Area. There are a number of sensors in the head, torso, legs and arm surface of the mannequin model evenly.
Burning Mannequin System fully complies with relevant technical indicators of ISO13506, ASTMF1930 and others ratings of the burning dummy system. The body size of the mannequin matches the standard Chinese adult male body shape, and 135 SS heat flux sensors are installed all over the body, covering various parts such as the torso, head, hands and feet.
The flaming mannequin model adopts 1:1 adult male model, the material is FRP with stable performance, flame retardant and high strength and 2~3mm thick, 1.72m2 area. There is aiform a number of sensors in the surface of the manikin's head, torso, legs and arms.
Research on multi-layer protective clothing using the Burning Manikin system shows that the outer layer fabric has a significant influence on the protective performance of multi-layer protective clothing. Experiments were conducted with TPP devices and it was found that long-term exposure to a heat source with low heat flux was more likely to result in
The flaming mannequin model uses a 1:1 adult male model. The material is FRP with stable performance, flame retardant and heat resistant. high resistance and a thickness of 2 to 3 mm and an area of 1.72 m2. There are a number of sensors in the head, torso, legs and arm surface of the mannequin model evenly.
Burning Dummy System fully meets the relevant technical indicators of ISO13506, ASTMF1930 and other assessments dummy systems. The body size of the mannequin conforms to the standard Chinese adult male body shape, and 135 heat flux sensors are installed all over the body, covering various parts suchas the torso, head, hands and feet.
The flaming mannequin model adopts 1:1 adult male model, the material is FRP with stable performance, flame retardant and high strength and 2~3mm thick, 1.72m2 area. There are a number of sensors in the head, torso, legs and evenly the arm surface of the mannequin model.
Research on multi-layer protective clothing using the burning dummy system shows that the fabric of the layer external has an important influence on the protective performance of the multilayer has protective clothing. Experiments were performed with TPP devices, and it was found that long-term exposure to a heat source with low heat flux was more likely to result in
The Burning Man System/Burning Dummy is designed to objectively and scientifically evaluate the protective performance of special garments such as military uniforms, flame retardant clothing, firefighting clothing, clothing flame retardant and high temperature resistant work, and combustion The dummy system is at the forefront of the intersection of clothing.
Etching Dummy: Made of non-n-metallic materials, clothing Test flame duration is generally of 4s, the dummy surface should have good thermal stability under the condition of 300℃ burning flame. Sensor: The response of the combustion dummy surface sensor to the combustion flame should be similar to the response of human skin near the flame.
The flaming mannequin model adopts 1:1 adult male model, the material is FRP with stable performance, flame retardant and high strength, and 2~3mm thick, surface area of 1, 72 m2. There are a number of sensors in the head, torso, legs and arm surface of the mannequin model evenly.
Burning Mannequin System fully complies with relevant technical indicators of ISO13506, ASTMF1930 and others ratings of the burning dummy system. The size of the dummy body conforms to the standard Chinese adult male body shape, and 135 heat flux sensors are installed all over the body, covering various parts such as the torso, head, hands and feet.
The Burning Manikin model uses a 1:1 adult male model, the material ist made of stable, non-flammable and high-strength FRP performance and thickness of 2-3 mm, area of 1.72 m2 There are a number of sensors in the surface of the model's head, torso, legs and arms uniformly.
Burning Mannequin Model uses 1:1 adult male model, material is FRP with stability, a flame inerte and high strenght performance and thickness 2~3mm, area 1.72m2. There are a number of sensors in the surface of the head, torso, legs and arms of the mannequin model evenly.
Burning dummy model adopts 1:1 adult male model, the material is FRP stable, inert fire resistance and high strength resistance performance and thickness of 2~3mm, area of 1.72m2. There are a number of sensors in the head, torso, legs and arm surface of the mannequin model evenly.
You can also send a message to us by this email info@qinsun-lab.com, we will reply tu you within 24 hours.Now tell us your need,there will be more favorable prices!
Home |
Product |
About |
Contact
Email: info@qinsun-lab.com
No.258 Ban Ting road, Song Jiang district, Shanghai
Leave Message
WhatsApp