We Have More Than 10 Years of Experience.
  1. HOME > News

How to maintain sludge treatment equipment

General machinery and equipment require maintenance, and sludge treatment equipment is no exception. But what can we do to maintain our sludge treatment equipment?

1. Do a good job of lubrication of bearings. The bearing bears the full load of the machine, so good lubrication has a great relationship with the life of the bearing, which directly affects the service life and operation rate of the machine, so the lubricating oil injected must be clean and the seal must be good. The main oil injection parts of the bearings on the sludge treatment equipment include rotating bearings, roll bearings, all gears, movable bearings, sliding planes, etc.;

2. Pay attention to check the degree of wear and tear of the wearable parts, and pay attention to replacing the worn parts at any time;

3. Pay attention to whether all parts of the machine work normally;

4. If the bearing oil temperature rises, the cause should be stopped immediately to check and be eliminated;

5. Put the chassis plane of the movable device, and dust and other objects should be removed to prevent the movable bearing from moving on the chassis when the machine encounters materials that cannot be broken, resulting in serious accidents;

6. The newly installed wheel hoop is easy to loosen and must be checked frequently;

7. If there is an impact sound when the rotating gear is running, it should be stopped immediately for inspection and eliminated.

Through the above methods and measures, we can do a good job in the maintenance of the most basic sludge treatment equipment. More maintenance matters also require us to pay more attention to the process of equipment operation, and regularly check the performance of sludge treatment equipment.

What Can I Do For You?

You can also send a message to us by this email info@qinsun-lab.com, we will reply tu you within 24 hours.Now tell us your need,there will be more favorable prices!