Operation method and maintenance of belt conveyor

How to operate the conveyor:

1. The fixed conveyor should be installed on a fixed basis according to the prescribed installation method. Before the mobile conveyor is officially put into operation, the wheels should be wedged with a triangle or braked. In order to avoid walking around in the work, when there are multiple conveyors operating in parallel, there should be a one-meter passage between the machine and the machine, and between the machine and the wall.

2. Before the conveyor is used, it is necessary to check whether the running parts, belt buckles and bearing devices are normal, and whether the protective equipment is complete. The tension of the tape must be adjusted to the appropriate level before starting.

3. The belt conveyor should be started without load. Wait for normal operation before feeding. It is forbidden to enter the material first and then drive.

4. When there are several conveyors running in series, they should start from the unloading end and start in sequence. After all the normal operation, the material can be fed.