Installation requirements for fluorine-lined thermal insulation pneumatic diaphragm pumps

Installation requirements for fluorine-lined thermal insulation pneumatic diaphragm pumps

1. Pneumatic diaphragm pumps generally have vibration, and foot bolts should be installed in general.

2. If there is dirt in the compressed air, it will affect the normal start of the pump, and it is recommended that the user install pneumatic triplets.

3. When replacing the diaphragm, the inner wrist connecting rod and lead sleeve of the pump must be cleaned, and the white PTFE sealing ring must not be damaged, and it can be used as it is.

4. When sucking the medium that is easy to freeze, a valve should be installed at the inlet of the pump, and when the pump is stopped, the valve should be closed first, and then the pump should be opened for a few minutes, so as not to cause difficulties in opening the pump next time.

principle

1. The thermal insulation pneumatic diaphragm pump has good thermal insulation and cold insulation characteristics, and the diameter of the jacketed thermal insulation pneumatic diaphragm pump is consistent with the pipe diameter, and at the same time, it can effectively reduce the heat loss of the medium in the pipeline. It has good thermal insulation and cold insulation characteristics, and at the same time, it can effectively reduce the heat loss of the medium in the pipeline.

2. Thermal insulation diaphragm pump has been widely used in petroleum, chemical, metallurgy, pharmaceutical and other systems, effectively reducing the loss of medium heat in the pipeline and preventing the appearance of medium crystallization and solidification.

3. The function of the thermal insulation diaphragm pump is that when the temperature is high or low through the diaphragm pump, the substance in the thermal insulation pneumatic diaphragm pump will have a thermal insulation effect on the medium, so that the medium will not condense or stick to the inside of the pump, so that the opening and closing of the diaphragm pump can operate normally.

HOT NEWS